Semi-Auto Heat Transfer Screen Printing Line
MACHINA O PHATISA
Sehlomathiso
1. 1 Lethathamo la Kopo:
Mochini oa ZSA-1B o loketse ho hatisoa ha pampiri, PCB, polasetiki, tšepe, khalase le sehlahisoa se entsoeng.
1.2.Likaroloana:
1.2.1 Stainless steel worktable, ka pele-morao le ka ho le letona ho le letšehali, 'me ho hatisa ho sebetsa ka potlako le ka mokhoa o bonolo.
1.2.2 Mekhoa e meraro ea ho laola e ka khethoa: manual, single, automatic
1.2.3 E le ho lumellana le Phapang ea enke 'me u fumane phello e fapaneng ea khatiso, sekhechana sa ho khutlisa enke le enke se ka laoloa ho emisa ka ho le letona kapa le letšehali.
1.2.4 Ho amohela likarolo tse ntle tsa motlakase tse entsoeng ke bahlahisi ba tummeng, enjene e tsoang kantle ho naha le PLC.Tataiso e nepahetseng e phahameng e sililoeng e tiisa hore mochini o sebetsa hantle le ho boloka chelete e ngata ea mochini.
2. Litlhaloso
| 1 | Mohlala | XH-6090 |
| 2 | Sebaka sa Khatiso se Phahameng | 600x900mm |
| 3 | Worktable Dimension | 700x1000mm |
| 4 | Max.Screen Frame | 1380x1100mm |
| 5 | Botenya | 0-20 limilimithara |
| 6 | Max.Lebelo la ho hatisa | 13/min |
| 7 | Khatello ea moea | 3HP, 5.5-7.7kg/cm2 |
| 8 | Phepelo ea motlakase | 380V,2KW |
| 8 | Boholo ka Kakaretso | 1600mm*1060mm*1680mm |
| 9 | Boima ba 'mele | 580kg (hoo e ka bang) |
| 10 | 'Mala oa Nyeoe | Bosoeu/Boputsoa |
Re ka iketsetsa boholo bo bong bakeng sa basebelisi.Boholo bo ikhethileng le boima ba 'mele pls li latela sehlahisoa sa sejoale-joale.
3. Litlhaloso tsa Panel ea Ts'ebetso
- Letšoao la matla
- Barometer bakeng sa ho hatisa squeegee
- Printing Koto e laolang lebelo
- Koto e laolang lebelo la ho khutla ha oli
- Palo ea khatiso
- Khatiso ea bobeli
- Mokhoa oa ts'ebetso
- Pontšo ea nako ea Auto
- Nako e itirisang
- Ho nyoloha ho theoha
- Ho khutla ha oli
- Phetoho ea ho qhetsola
- Mokhoa oa ho hula moea
- Ho khutla ha oli ka potlako
- Khatiso
- ON/Off Sebōpi
- Khatello ea Scraper
- Sephahla se sireletsehileng
- Hlooho ea khatiso
4. Tlhophiso le Tlhahlobo
4.1 Mochini o lokela ho kenngoa sebakeng se hlakileng, 'me mocheso o boloke likhato tse 18-28.
4.2 Check fastener e lekana hantle, 'me karolo e tsamaeang e na le oli ea lubrication ka mor'a ho bula lebokose la lepolanka.Khetha sebaka sa ho kenya seliba bakeng sa mochini, kopanya rabara e 4 maotong, e lokise 'me u boloke tafole e sebetsang e otlolohile.Mohala o fatše o lokela ho kopanngoa le mochine.
4.3 Terata e nang le mebala e 'meli ke terata e fatše, e meng ke terata ea mollo.Ka mor'a hore lithapo li hoketsoe hantle.Tobetsa 'Mokhoa oa Ts'ebetso' ho "Manual".
Tobetsa 'Mokhoa oa ho Suction oa Moea' ho 'monya kamehla'.
Bulela matla (sheba setšoantšo sa 1.4).Bulela 'Balofo ea Tšireletso'.
Seo se tla etsa hore fan e sebetse.Beha pampiri ea holim'a lager holim'a tafole e sebetsang, haeba pampiri e ne e anngoe ke tafole ea ho sebetsa.Ho bolela hore khokahano ea lithapo e nepahetse.Haeba pampiri e ne e fefoloa ke moea, ho bolela hore terata ea mollo ea matla e khahlanong le mokhahlelo, e khutlisa tse peli tsa terata ea mollo.
4.4 Khatello ea moea bakeng sa mochine ke 5.5 ~ 7KG / cm2.Haeba khatello ea moea e le ka tlase ho palo, ntša sethopo, retelehela ho ea ka nako, etsa hore khatello ea moea e eketsehe.Fetola ka tsela e fapaneng ho tla etsa hore khatello ea moea e theohe.
4.5 Tobetsa 'Operation Mode' ho laola 'manual'.Lekola mochini ho ea holimo le tlase, ho sisinyeha ka ho le letšehali le ka ho le letona.
Tobetsa konopo ea 'Scraping conversion', leka scraper, le oli ea ho khutlisa scraper.
Tlhokomeliso: Ha e khone ho etsa opereishene e 'ngoe, ho fihlela tsohle tse kaholimo li sebetsa hantle.Ho seng joalo, e tla senya mochine.
4.6 E phethiloe ka holimo, ho latela tlhahlobo ea khatiso ea Automatic le Single.
4.6.1 Tobetsa 'Operation mode' ho 'Single', hata pedal ea leoto, ebe u qeta ho hatisa hang.
4.6.2 Tobetsa konopo ea 'Rapid Oil Return', skrineng
Motsamao ke:
Ho theosa - Motsamao o ka letsohong le letšehali --holimo, Motsamao o ka ho le letona oa Scraper
E ka eketsa katleho ea khatiso.
4.6.3 Tobetsa 'Khatiso ea Bobeli' TSOELA, motsamao ke:
Ho theoha—Motsamao oa Leqeleng — Ho le letona —- Le letšehali — Ka ho le letona — Holimo
E loketse khatiso ea enke e teteaneng.
4.6.4 Tobetsa 'Mokhoa oa ts'ebetso' ho ea ho Automatic, fetola Taolo ea Nako KT(0~10S).Mochini o ile oa phethela metsamao eohle ka boiketsetso.(E loketse mosebeletsi ea nang le tsebo, ho e-na le "Foot pedal"
4.6.5 Konopo ea Tšohanyetso
Konopo ea Tšohanyetso e ka phahama ha mochini o sebetsa.O tlameha ho hata pedal ea Leoto ho etsa hore mochini o sebetse ka mor'a ho sebelisa Konopo ea Tšohanyetso.
5. Hlalosa ts'ebetso
5.1.Kenya le ho Fetola Net Frame
Fetolela ho 'Offer Air' (joalo ka setšoantšo1.35), etsa Scraper holimo, lokolla Net Frame Arm screw (joalo ka setšoantšo1.9).Fetola Net Frame Arm mahlakoreng ka bobeli ho bolelele bo loketseng (joalo ka setšoantšo2.25), kenya Net Frame ho clamp ebe u tiisa screw.(joalo ka setšoantšo1.29).E phethiloe, tiisa screw.(joalo ka setšoantšo 1.9)
5.2.Fetola boholo ba khatiso.
Kenya sebaka sa rabara ea scraper ea khatiso ho fetola bophara ba khatiso ho latela kopo ea hau.(joalo ka setšoantšo1.33).
Fetola bolelele ba khatiso: Lokolla li-screw tse 2 (joalo ka setšoantšo1.11), fetola le letšehali le le letona sebakeng se loketseng.Tiisa sekoti.
Lebelo la ho printa le ho khutla ha Oli (joalo ka setšoantšo sa3) 'Lebelo la Khatiso', ho ea ka lebelo le loketseng.
5.3.Latela tatellano e ka tlase ho lokisa thipa ea scraper le ho khutlisa oli.
a.Ho potoloha: lokolla li-screw tse 4 (joalo ka setšoantšo1.24) ho lokisa ho potoloha.
b.Parallelism: lokisa li-screw tse 4 (joalo ka setšoantšo1.12) ho boloka sekhechana le thipa ea oli e khutlisang e bapile le bokaholimo ba Net Frame.
c.Lebelo: Lokisa 4 screw (joaloka setšoantšo1.12) ka ho le letona ho laola lebelo la ho phahamisa la Scraper le thipa ea ho khutlisa oli.Fetola 'lebelo la khatiso' ho laola lebelo la scraper.
d.Khatello bakeng sa scraper: Fetola valve ea khatello (joaloka setšoantšo1.39) ho laola khatello ea scraper (joaloka setšoantšo1.38).Bala nomoro ho tsoa ho Barometer.
e.Hula kotola 'hlooho e hatisang' ho tsoa (joalo ka setšoantšo sa 3.19), ho laolla thipa ea scraper le ea ho khutlisa oli.E kentse thipa ea ho khutlisa scraper le oli tobetsa 'printing head'.
5.4.Fetola bophahamo pakeng tsa Net Frame le worktable.(According to the thickness of workpiece) Ka morao ho mochine, bula lemati.
Tlosa sekoti.(sheba senepe se ka tlase) Fetolela Molamu ho ea holimo, lebisa Molamu ho ea tlase.
Tiisa sekoti.
| NO. | Lebitso | NO. | Lebitso |
| 1 | Adapter ea pedal switch | 22 | Air Drum bakeng sa scraper |
| 2 | Lebili la bokahohle | 23 | Screw ea Lock Knife |
| 3 | Ho kenya matla | 24 | Ink Knife Rotative adjustor |
| 4 | Phetoho ea Matla | 25 | Arm of Net Frame |
| 5 | Micro adjustor bakeng sa Worktable | 26 | Pillar for Lift Net Frame |
| 6 | Worktable Lock Screw | 27 | Speed Adjutor bakeng sa Lift Net Frame |
| 7 | Net Frame Rotative Adjutor | 28 | Phahamisa Net Frame Air Drum |
| 8 | Net Frame Height Adjusted Screw | 29 | Screw to Tighten the Net Frame |
| 9 | Net Frame Left & Right Adjusted Screw | 30 | Left & Right Net Frame |
| 10 | Motor | 31 | Tafole ea mosebetsi |
| 11 | Sekhahla sa motsamao | 32 | Hook bakeng sa Thipa ea Enke |
| 12 | Scraper Speed Adjuster | 33 | Scraper |
| 13 | 34 | Thipa ea enke | |
| 14 | Air Drum bakeng sa scraper | 35 | Air Drum bakeng sa scraper |
| 15 | 36 | Emergency Stop | |
| 16 | Hula Chain | 37 | Phanele |
| 17 | 38 | Barometer ea Scraper | |
| 18 | Kantle Moriti | 39 | Scraper Pressure Adjutor |
| 19 | 40 | Monyako oa Lebokose la Motlakase | |
| 20 | Ink Return Knife Pressure Adjustor | 41 | Pedal ea Leoto |
| 21 | Scraper Pressure Adjutor |
6. Tlhokomelo:
6.1.Qoba enke le organic solvent thibela lesoba la ho monya holim'a worktable.
6.2.Lahlela oli e nyane ea enjine 10 # holim'a tšiea nako le nako ha u sebetsa.
6.3.Mochine o na le motsoako oa moholi oa Oli (sheba setšoantšo sa 2).
6.4.Hloekisa Sefe (joalo ka setšoantšo2.7).Fana ka moea, fetola konopo ea drain (joalo ka setšoantšo2.8).
Hlatsoa seponche ka mohope oa metsi (joalo ka setšoantšo2.7) khafetsa.Tlosa Sefe, ntša seponche, u se siee metsotso e seng mekae ka metsing a hlakileng, 'me u se omise.
7. Ho khomarela
1. Buka ea ts'ebetso
2. Screwdriver 2 pcs, 10' Spanner, hex Spanner, Rob
3. 4 Leoto la rabara
4. Scraper le Ink khutlisetsa thipa 350, 400
************************************************ ************************************************ ************************************************ ******************
MOSEBETSI OA PORO
Tlhaloso e khuts'oane
Ka mor'a ho hatisa lisebelisoa tse tsamaisanang le mosebetsi oa matsoho oa setso.Mochini ona o loketse ho sebelisoa, o sebetsa hantle haholo, o tenyetseha ebile ha o na tšilafalo, e leng ho eketsang tlhahiso le ts'ebeliso ea thepa e tala, hammoho le ho hlahisa litšoantšo tse ntle.
Mochine ona, likarolo tsa boemo ba bohlokoa tse kang ho noa phofo, transducer li kenngoa ka ntle ho naha ka melemo ea nako e telele le e tsitsitseng.Haholo-holo, mochini ona o sebetsa hantle le ba nang le tlhokahalo e phahameng ea pampiri, filimi, glitter le phofo e chesang e qhibilihang.Li-drive tsohle tse mochining ona li na le lebelo le sa feleng.Haeba ho hlokahala, e ka hokahana le lisebelisoa tsa ho omisa le lisebelisoa tsa pholiso ea lifoto tsa UV.
Lintlha tse ka sehloohong tsa tekheniki:
| Mohlala | Kakaretso ea Matla | Bophara ba Lebanta la Phetiso | Bophara ba Phofo | Botenya ba Pampiri | Kakaretso Dimensions | Lebelo (Pcs/Hora) |
| ZSCT-II | 4.5KW | 1000(mm) | 900(mm) | 1—5(mm) | 2000*1700*2000 | 2000 |
Bala buka ka hloko, pele u sebelisa mochine.Se ke oa fetola konopo pele o hokela matla a motlakase.
Buka ea Ts'ebetso
Khopotso e mofuthu: Phofo e ke ke ea hasana ho fihlela filimi e fetakutlo.
Mochini ona o na le li-switches tse arohaneng bakeng sa ho anya matla ho ea holimo le tlase, hammoho le li-switches bakeng sa ho tsamaisa, ho phunya, ho fepa phofo, le electrostatic neutralizer.
Mokhoa oa ho qala
- Kenya matla a maholo ka lehlakoreng le letšehali.
- Bulela sesebelisoa sa motlakase (Sheba setšoantšo sa II-2).
- Fetolela enjene e monyang matla e eang holimo (Sheba setšoantšo sa II-8), 'me u lokafatse khafetsa ea transducer ho 38-42HZ.
- Fetolela enjene e monyang matla e theohelang tlase (Sheba setšoantšo sa II-11), 'me u lokafatse khafetsa ea transducer ho 55-65HZ.
- Kenya matla a ho tsamaisa (Sheba setšoantšo sa II-4), 'me u fetole phetoho ho 20-65HZ.
- Fetola sesebelisoa sa ho fepa phofo (Sheba setšoantšo sa II-15), 'me u fetole phetoho ho 20-65HZ.
- Tšela phofo e chesang e qhibilihang ka har'a terei ea lerole, ebe u kenya motlakase oa lerole (Sheba setšoantšo sa II-17).Ntlha ea pele, ho lokisa lebelo la lerole (ka potlako, ho feta phofo).Kapa ho lokisa linate tse tharo tlas'a funnel ea lerole (Sheba setšoantšo sa I-4) ho lokafatsa palo ea phofo, e le hore e finyelle tlhokahalo ea sehlahisoa bakeng sa botenya ba phofo le ho leka-lekana.
- Mokelli oa phofo ka lehlakoreng le letšehali (Sheba setšoantšo sa II-21) o na le mosebetsi oa ho khothalletsa phofshoana-baesekele.Hangata, e fetoha ho tloha ho 60 ho isa ho 70.
- Bula sesebelisoa sa electrostatic neutralizer (Sheba setšoantšo sa II-13)
Fetola mochini
1.Ho fetola sebaka pakeng tsa ho monya phofo ho ea holimo le tlase ho 2-3mm.
Haeba ho ntse ho e-na le lebili la lisampole nakong eo e ntseng e sebetsa (hangata, e se e lokisitsoe pele e qala), o ka lokisa bophahamo ba motlakase ho ea holimo ho fihlela tlhoko ea sehlahisoa.
1.1 Lokolla linate tse 'nè hukung.Khopotso: Fetola bophahamo feela ka mor'a ho lokolla linate tse 'nè.(Sheba setšoantšo)
1.2 Lokolla nate (Sheba setšoantšo sa 1), lokisa bolelele bakeng sa ho hulela matla holimo (Sheba 1, 21,22).Kapa (Sheba setšoantšo sa 1) Phetla lekhalo ka ho le letona le atamela.Fetolela ka tsela e khahlanong le oache lekhalo le atolohe.
1.3 Fetola linate tse 'ne sebakeng sa ho monya phofo, etsa hore e leka-lekane.(Sheba setšoantšo sa 1) Tiisa likurufu tse ntšo (Sheba setšoantšo sa 1)
Mokhoa oa ho tsosolosa phofo
1.Haeba ho na le masala a phofo holim'a sehlahisoa, ho molemo ho eketsa lebelo la phofo ho ea holimo (Sheba setšoantšo Ⅱ-8).Leha ho le joalo, phallo e phahameng ea moea e ka boela ea baka ho tlama ha pampiri, ho fetola hantle.
Haeba ho ntse ho e-na le masala a phofo sehlahisoa, ka mor'a ho eketsa lebelo la ho anya phofo ho ea holimo, hlahloba bolelele ba ho ea holimo le tlase.Haeba lekhalo le le leholo haholo, latela mohato o fetileng ho lokisa bolelele.
Sheba mokotla oa lerole ntle le phofo ho thibela lesoba la moea.Ho ea ka botenya ba phofo, hoa hlokahala ho hloekisa mokotla oa lerōle ho qoba ho thibela lesoba la moea.
Lekola lehlakore le ka tlase la mochini, etsa bonnete ba hore sistimi e thusang ea ho tsosolosa phofo e ntse e tsoela pele.
Taolo ea palo ea phofo e sisinyehang
- Fetola taolo ea lebelo la ho sisinyeha ha phofo (Sheba setšoantšo sa II-22).
2. Fetola selaoli sa lebelo la ho sisinyeha ha phofo (Sheba setšoantšo sa II-22) se ntse se sa fihlelle tlhoko ea hau.E ka khona ho lokisa screw ka letsohong le letšehali la cage (Sheba setšoantšo).
Mokhoa oa ho tima motlakase
- tima molaoli oa tray ea lerole (sheba setšoantšo sa II -17)
- Koala sesebelisoa sa ho thothomela (sheba setšoantšo Ⅱ-22)
- koala switch ea matla a hohela holimo (sheba setšoantšo sa II-7)
- koala switch ea matla a hohela tlase (sheba setšoantšo sa II-10)
- koala switch ea ho tsamaisa (sheba setšoantšo sa II-4)
- switch ea switch ea (sheba setšoantšo sa II-21)
- switjha ea molaoli oa ho tsamaisa phofo (sheba setšoantšo Ⅱ-15)
- koala switch ea matla a mantlha (sheba setšoantšo sa II-2)
- Hloekisa karolo ea taolo 'me u e koahele ka baki ea lerōle
Ho ba teng ka mochini
1. Kamora ho sebetsa nako e itseng, bula baffle, 'me u tlatse likarolo tseo tse sebetsang ka oli ea enjene ea 20 #.Haeba ketane e le butle, sebelisa lisebelisoa tsa elastic ho fetola.
2. Ha u ntse u nkela lisebelisoa tse tala tse kang glitter le phofo e chesang e qhibilihisang, sebelisa moea o hatelitsoeng ho hloekisa likarolo tsena kaofela ho qoba phofo e tsoakiloeng.
3. Ho ea ka botenya ba phofo, hoa hlokahala ho hloekisa mokotla oa lerōle ho qoba ho thibela lesoba la moea.
Ho sebetsa mochine o se nang letho
Bulela switch bakeng sa ho phahama ha mochini (Sheba setšoantšo sa 3).Fetola switch karolong e ka holimo ea halofo ea mochini e tla phahama, ho seng joalo e theohe.
Fetolela sesebelisoa sa ho tsamaisa hore se iketsetse (Sheba setšoantšo sa II-4), 'me u koale lisebelisoa tse ling kaofela, etsa hore filimi e futhumatsang e fete.
Qeto ea Phoso
1. Ke kopa o nke sebaka sa "speed governor" ha se sa sebetse.
2. Ka kopo latela taelo ea ho ba teng ha Machine haeba phofo e sa monye ka ho feletseng joaloka pele.Kapa o ka eketsa destaticizer ho sebetsana le bothata bona.
3. Ka kopo, hlahloba phofo hore na e hloekile ebile e omme haeba e le lerōle ka thata.Haeba phofo ke metsi, ka kopo insolating bona tlas'a letsatsi.
4.If phofo recycling tube block, Ka kopo, sheba botlaaseng ba foreime bulela tsamaiso ea masala.Kapa Lekola phofshoana e anyang ho ea tlase, etsa bonnete ba hore e ea sebetsa.
5.Fetola switjha karolong e ka holimo ea halofo ea mochini e tla phahama.
************************************************ ************************************************ ************************************************ ******************
Manipulator
